J
Jessy Fast delivery!
E
Eric Ended up not needing them. But they do work well.
The foambeak is a canned foam insulation nozzle that attaches to your off-the-shelf can of GREAT STUFF* gap and crack foam. This nozzle will allow you to apply foam (from the can) to any surface, including vertical and overhead surfaces. You can expect to get about 3.5 sqft of coverage from the average 16oz can of GREAT STUFF* foam. Our Foam Beaks are made in the USA out of ABS plastic, so they are tough and durable. (ABS plastic is the same plastic that old 70’s and 80’s telephones were made out of.) Each item is manually inspected and machined to ensure proper hole size.
The foambeak works great when you want to add more foam insulation to your hot tub, Jacuzzi or spa. We have used these to insulate the back-side of a bathtub before installation (takes approximately 4-5 cans to cover the back-side of an average size bathtub).
Use the foambeak to insulate just about anywhere you wish. Have a cold attic access panel? Or how about that drum that you use at parties to keep a keg cold? The uses are endless!
*We are in no way affiliated with the makers of the canned foam, nor do we sell or distribute the canned foam. You must supply your own cans of GREAT STUFF gap and crack foam.
These foambeak's will fit the following:
Great Stuff*: with 5.05mm OD (small) straw. This is the straw that comes with the most popular cans at your big box stores. Some modification is required with their new RED straw with the quick stop valve. Simply cut the valve off and then install the FoamBeak.
Touch-n-Foam*: with 5.05mm OD (small) straw. This is the straw that comes with the most popular cans at your big box stores
Loctite - TITE FOAM
Fast delivery!
Ended up not needing them. But they do work well.
After ordering 2 pumps from Amazon that were both damaged, we ordered from DIY and it was sent very well packed and working perfectly! Thanks!!
What a fun build!! The plans made it a very easy build and I am very happy with the outcome. I did the chiller bypass since I live in the mountains of Idaho and will not need it this winter. Will most likely add it next summer. Joe was very quick to answer a question I had about cutting the slates My motto is I do my best and will chalk the rest.
Followed the plan exactly and, other than one unrelated mishap with spilled PVC Cement, it all went according to plan. Everything appears to function flawlessly.
The cover is made very well and the quality it good. But be aware of one thing.
If you have not built a frame around the stock tank there is no place to secure the clips. If you use the supplied screws and screw them into the stock tank they will come out the other side.
I was not planning on building a frame around my tank. So I will have to come up with a way to secure the clips now.
It's not a perfect fit and it would fit much better if i could use the clips.
I wish DIY Cold Plunge would have disclosed this as I may not have bought it due to this problem.
However, it is made well and that is the only reason I plan on keeping it and come up with a way to secure it.
Fast delivery and great quality