Couldn't load pickup availability
The foambeak is a canned foam insulation nozzle that attaches to your off-the-shelf can of GREAT STUFF* gap and crack foam. This nozzle will allow you to apply foam (from the can) to any surface, including vertical and overhead surfaces. You can expect to get about 3.5 sqft of coverage from the average 16oz can of GREAT STUFF* foam. Our Foam Beaks are made in the USA out of ABS plastic, so they are tough and durable. (ABS plastic is the same plastic that old 70’s and 80’s telephones were made out of.) Each item is manually inspected and machined to ensure proper hole size.
The foambeak works great when you want to add more foam insulation to your hot tub, Jacuzzi or spa. We have used these to insulate the back-side of a bathtub before installation (takes approximately 4-5 cans to cover the back-side of an average size bathtub).
Use the foambeak to insulate just about anywhere you wish. Have a cold attic access panel? Or how about that drum that you use at parties to keep a keg cold? The uses are endless!
*We are in no way affiliated with the makers of the canned foam, nor do we sell or distribute the canned foam. You must supply your own cans of GREAT STUFF gap and crack foam.
These foambeak's will fit the following:
Great Stuff*: with 5.05mm OD (small) straw. This is the straw that comes with the most popular cans at your big box stores. Some modification is required with their new RED straw with the quick stop valve. Simply cut the valve off and then install the FoamBeak.
Touch-n-Foam*: with 5.05mm OD (small) straw. This is the straw that comes with the most popular cans at your big box stores
Loctite - TITE FOAM
A must have for insulating your cold tub
Fast delivery!
Ended up not needing them. But they do work well.
The short version:
Hi! I'm Joe, and I've helped thousands of people save thousands of dollars by building DIY Cold Plunges and Saunas.
I've got proven, beginner friendly plans and products to bring home BIG health benefits.
Questions? Don't hesitate to reach out 👍
Great product, make sure you follow the instructions. Joe is very helpful and communicates well.
The plans were easy to follow, along with the video. Cut list was accurate. Saving me thousands! Worth it!
One thing I would recommend to all is follow rhe plan in the order Joe created the video etc. it will save you time. I was impatient and wanted to use it asap. So I put doors on without trim, and paint. Just be patient and do all the steps in order. They’re in the order for a reason.
I have ordered multiple sets of the ozone tubing and check valves. They deteriorate within months. The tubing is clearly not a high quality ozone rated product. I have also purchased a few of the ozone generators. They are good at producing ozone. It would be great if the tubing was made of tygon or a similar rated material.
I recently finished my sauna build and needless to say I am so happy with the finished product! This was my first DIY build of any kind so I was a bit intimidated going in, but the plans and videos were extremely easy to follow, and Joe was always responsive via email with any questions I had.
Overall it took me three weekends to build an XL sauna with a window and that is as a novice builder with only some minor hiccups here and there
This is literally a few pieces of metal and loose wires. comes as a bunch of pieces. there is no instructions. the video in the $90 sauna build plans (lol) has a video with a link that no longer works. guess i'll just stare at it until it puts itself together. and...No smart plug...FAIL