Couldn't load pickup availability
The foambeak is a canned foam insulation nozzle that attaches to your off-the-shelf can of GREAT STUFF* gap and crack foam. This nozzle will allow you to apply foam (from the can) to any surface, including vertical and overhead surfaces. You can expect to get about 3.5 sqft of coverage from the average 16oz can of GREAT STUFF* foam. Our Foam Beaks are made in the USA out of ABS plastic, so they are tough and durable. (ABS plastic is the same plastic that old 70’s and 80’s telephones were made out of.) Each item is manually inspected and machined to ensure proper hole size.
The foambeak works great when you want to add more foam insulation to your hot tub, Jacuzzi or spa. We have used these to insulate the back-side of a bathtub before installation (takes approximately 4-5 cans to cover the back-side of an average size bathtub).
Use the foambeak to insulate just about anywhere you wish. Have a cold attic access panel? Or how about that drum that you use at parties to keep a keg cold? The uses are endless!
*We are in no way affiliated with the makers of the canned foam, nor do we sell or distribute the canned foam. You must supply your own cans of GREAT STUFF gap and crack foam.
These foambeak's will fit the following:
Great Stuff*: with 5.05mm OD (small) straw. This is the straw that comes with the most popular cans at your big box stores. Some modification is required with their new RED straw with the quick stop valve. Simply cut the valve off and then install the FoamBeak.
Touch-n-Foam*: with 5.05mm OD (small) straw. This is the straw that comes with the most popular cans at your big box stores
Loctite - TITE FOAM
A must have for insulating your cold tub
Fast delivery!
Ended up not needing them. But they do work well.
The short version:
Hi! I'm Joe, and I've helped thousands of people save thousands of dollars by building DIY Cold Plunges and Saunas.
I've got proven, beginner friendly plans and products to bring home BIG health benefits.
Questions? Don't hesitate to reach out 👍
Bought the sauna, heater kit, and backrest plans. Super happy with my purchase. Joe was incredibly helpful and communicated well when I had questions. The videos explained thing very well and I was able to slowly complete my build over multiple weekends when I had a few spare hours. Total hours it took me to build was probably like 50 hours if I added it all up. But I am not the most handy with this sort of stuff.
Only minor negative aspect was that the heater kit had a safety issue of sorts that cause the product to be recalled. And rather than being DIY and working with the customers to find a solution, Joe seemed to be forced to kind of pull back from his normal engaged content and just offer refunds. Likely this was legally his only option, but a little disappointing.
I was able to troubleshoot, replace parts, and address the issue with the help from other customers on Instagram. And things work great now! I would do it all again if given the choice. The plans and products Joe offered were top notch and I am very happy with how things turned out! Now I’m considering building a cold plunge…haha
Perfect fit and super easy to install. Joe helped answer all my questions for my specific setup. Thanks Joe!