The foambeak is a canned foam insulation nozzle that attaches to your off-the-shelf can of GREAT STUFF* gap and crack foam. This nozzle will allow you to apply foam (from the can) to any surface, including vertical and overhead surfaces. You can expect to get about 3.5 sqft of coverage from the average 16oz can of GREAT STUFF* foam. Our Foam Beaks are made in the USA out of ABS plastic, so they are tough and durable. (ABS plastic is the same plastic that old 70’s and 80’s telephones were made out of.) Each item is manually inspected and machined to ensure proper hole size.
The foambeak works great when you want to add more foam insulation to your hot tub, Jacuzzi or spa. We have used these to insulate the back-side of a bathtub before installation (takes approximately 4-5 cans to cover the back-side of an average size bathtub).
Use the foambeak to insulate just about anywhere you wish. Have a cold attic access panel? Or how about that drum that you use at parties to keep a keg cold? The uses are endless!
*We are in no way affiliated with the makers of the canned foam, nor do we sell or distribute the canned foam. You must supply your own cans of GREAT STUFF gap and crack foam.
These foambeak's will fit the following:
Great Stuff*: with 5.05mm OD (small) straw. This is the straw that comes with the most popular cans at your big box stores. Some modification is required with their new RED straw with the quick stop valve. Simply cut the valve off and then install the FoamBeak.
RED CAN - Gap and Crack
BLACK CAN - Big Gap Filler
BLUE CAN - Window and Door
ORANGE CAN- Fire Block
GREEN CAN - Pest Block
Touch-n-Foam*: with 5.05mm OD (small) straw. This is the straw that comes with the most popular cans at your big box stores
I have a small deck for my cold plunge so I was super excited to find Joe's new design with a minimalist footprint. The plans and videos were very detailed. There were a lot of steps I had never done before, but thanks to the high level of detail, I had complete confidence at every step on what to do. The plans and supplies list saved me so many hours and the finished product looks and works great!
⭐️⭐️⭐️⭐️⭐️Building our own cold plunge was one of the best wellness decisions we have ever made.
Joe’s plan was easy to follow and the end product is better quality than the commercial plunges.
We use it almost daily, first thing in the morning. It’s a great way to feel clear, calm, and recharged. If you’re on the fence about building your own plunge… Do It!
Joe knows his craft and has made purchasing parts easy! No need to go to Home Depot or find it on Amazon and keep going back-and-forth- he has it down!