Foambeak Canned Foam Insulation Nozzle
Couldn't load pickup availability
The foambeak is a canned foam insulation nozzle that attaches to your off-the-shelf can of GREAT STUFF* gap and crack foam. This nozzle will allow you to apply foam (from the can) to any surface, including vertical and overhead surfaces. You can expect to get about 3.5 sqft of coverage from the average 16oz can of GREAT STUFF* foam. Our Foam Beaks are made in the USA out of ABS plastic, so they are tough and durable. (ABS plastic is the same plastic that old 70’s and 80’s telephones were made out of.) Each item is manually inspected and machined to ensure proper hole size.
The foambeak works great when you want to add more foam insulation to your hot tub, Jacuzzi or spa. We have used these to insulate the back-side of a bathtub before installation (takes approximately 4-5 cans to cover the back-side of an average size bathtub).
Use the foambeak to insulate just about anywhere you wish. Have a cold attic access panel? Or how about that drum that you use at parties to keep a keg cold? The uses are endless!
*We are in no way affiliated with the makers of the canned foam, nor do we sell or distribute the canned foam. You must supply your own cans of GREAT STUFF gap and crack foam.
These foambeak's will fit the following:
Great Stuff*: with 5.05mm OD (small) straw. This is the straw that comes with the most popular cans at your big box stores. Some modification is required with their new RED straw with the quick stop valve. Simply cut the valve off and then install the FoamBeak.
Touch-n-Foam*: with 5.05mm OD (small) straw. This is the straw that comes with the most popular cans at your big box stores
Loctite - TITE FOAM
Works great! Insulating the sides and bottom of my cold plunge greatly reduced the chiller run time. Also now the sides of my ice bath no longer condensate. It was a bit messy, I went through more foam spray than I estimated. I also painted the foam spray black after it dried, and it looks alright.
A must have for insulating your cold tub
Fast delivery!
Ended up not needing them. But they do work well.
Works great! Insulating the sides and bottom of my cold plunge greatly reduced the chiller run time. Also now the sides of my ice bath no longer condensate. It was a bit messy, I went through more foam spray than I estimated. I also painted the foam spray black after it dried, and it looks alright.
A must have for insulating your cold tub
Fast delivery!
Ended up not needing them. But they do work well.
The short version:
Hi! I'm Joe, and I've helped thousands of people save thousands of dollars by building DIY Cold Plunges and Saunas.
I've got proven, beginner friendly plans and products to bring home BIG health benefits.
Questions? Don't hesitate to reach out 👍
Seamless connections, great instructions, prompt responses. Joe is the best
Great customer service, product was easy to install and is functioning much better than the oem product.
Assuming it really is plastic free, it seems to be a great product (Ill burn some later and report back if its not!). Fast delivery, too. Thanks!
Site is a great resource and products have been solid. Thanks