Couldn't load pickup availability
This is the step-by-step PDF plan to build an in-line sanitation & filtration system for your DIY cold plunge. Make sure to check measurements of your parts before starting your build.
Included in this download:
**I do have a similar step-by-step tutorial on YouTube for this project**
My YouTube Channel will be a great resource in addition to this PDF. Make sure to follow me there, on TikTok & Instagram - @DIYCOLDPLUNGE
I would also recommend joining my private group on Facebook, we have thousands of people learning and experimenting with different set-ups.
All digital download orders are final and non-refundable.
Way better setup than intex filter system. I can keep the pump running without a timer and keep the water filtered with this pretty looking setup! Thanks Joe!
I highly recommend this plan if you are building a cold tub. Typically, I would not spend money on plans like this and would instead binge hours and hours of content to figure out each piece and step for free.
I am so glad I didn’t waste the time because these plans are fantastic. With every part of the plan that I felt like I should deviate from to have better results, I quickly found out why Joe did it the way he did or with the parts he used. He has put in the work already, so why reinvent the wheel!
This plan paid for itself over and over again. It saved me hours of research time, time I would have otherwise lost from trial and error, multiple trips to the hardware store and dealing with returns. With this plan, I had all the right parts and layout completely set up ahead of time. As soon as my chiller arrived, I spent a few hours connecting it all together and we were chilling! Joe’s done all the trial error, learning from mistakes and figuring out how best to lay everything out so you don’t have to! Not buying this plan is like driving an hour out of your way to save $0.02 a gallon on gas.
I had my reserves about building my first cold plunge. I have next to no experience building anything. I actually bought new tools just to build my first project. These instructions were extremely detailed and easy to follow. It took me a bit but I have my own cold plunge. It's extremely cold and painful but is exactly what I needed. My only critique would be some of the videos and projects get comingled. I mean the video for the steel stock tank is a different build from the 150 gallon tank and at times I got a bit confused. If the projects were separated into entire build sections I think it would have been easier to digest.
Joe, thank you for these detailed plans!! I put this altogether this past weekend and it works great.
The short version:
Hi! I'm Joe, and I've helped thousands of people save thousands of dollars by building DIY Cold Plunges and Saunas.
I've got proven, beginner friendly plans and products to bring home BIG health benefits.
Questions? Don't hesitate to reach out 👍
This thing is awesome ! Made a few personal mods but man, I’ve used this thing for 6 days straight. To be honest , only takes 50 min to get to a temp that I can tolerate for 20 min. Any hotter and it’s very uncomfortable. Instructions were SUPER clear and helpful. If you are thinking about do this, pull the trigger!
Very happy with my sauna works exactly as described. I reached out now a couple of times during the build process his response was second to none. In most cases he was back to me within hours. On top of the the video instruction he does is extremely well thought out not leaving out any detail. 10 out of 10 would recommend to anyone looking for a budget sauna that reaches high temps.
A great addition to the Sauna. Joe’s instructions were clear and easy to follow.
Great plans, the videos are especially helpful to follow along with.This sauna is a beast!!! So sturdy and well designed.